summary

the horizontal flaring machine is a special equipment for flaring wheel rims. the machine includes host device, hydraulic system and electric control system, which features simple and reasonable layout, good performance for centering, one-time flaring task can be processed. its working pressure, working speed and stroke range can be adjusted according to the needs of the process technology. it can be operated by manual mode and automatic mode.

specification

model number	kkj-300-ah
max. width of rim band	320mm
max. diameter of rim band	18 inches
mini. diameter of rim band	12 inches
max. thickness of rim band	5mm
flaring force	2000kn
rated pressure of operating system	20mpa
total power	22kw

horizontal flaring machine-九游会登录

the equipment has horizontal structure (like structure sketch). the left tooling is fixed, while the right one can be guided by cylindrical linear guide way to move to left or right side with oil cylinder. the left and right sides are formed in enclosed structure through upper and lower pulling plates, which much increase rigidity and accuracy. the oil cylinder is fixed on right fix seat in form of front flange and finishes rim flaring operation by the means of pushing middle movable part.

when the workpiece in slide way rolls to the target place, right tooling will be driven by oil cylinder to quickly approach to workpiece. when it gets to the working position, oil cylinder will change to feeding speed, tooling will automatically locate to central and start flaring. when feeding in the place, the proximity switch or pressure sensor will transmit signal, oil cylinder will start return, proximity switch will transmit signal when it detects that get to the target place, oil cylinder will back to home position. a processing circle mission is finished.

this equipment consists of three parts: host machine, hydraulic driving device and electrical control device. the host machine includes lathe bed, flaring tooling; hydraulic driving device includes oil tank, oil pump-motor group, pile-up valve, etc.; electrical device includes electrical control cabinet, etc. the host machine and hydraulic driving device is installed on concrete foundation, fixed by expansion bolts. the electrical cabinet is fixed on the back side of lathe bed.

flaring tool

this flaring machine need to install flaring tool for each diameter, one (1) kind of rim diameter need one (1) set of flaring tool.